Left input focursite itrack solo

The B2M™ Universal Bass to MIDI Converter.

Left input focursite itrack solo

Postby AC2N » Tue Apr 29, 2014 9:43 am

Hello from France, sorry for the very bad English.
I bought B2M ipad and unfortunately I have the solo iTrack. Its entrance is on the right (number 2). It does not work, I realized here.
I wonder if an XLR-jack adapter into the left would look better than the microphone input associated with headphones ?
An upcoming update will allow her to choose the input ?

Otherwise it is very promising, just playing acoustic in the ipad micro , thé résult is not bad .
AC2N
 
Posts: 2
Joined: Tue Apr 29, 2014 8:26 am

Re: Left input focursite itrack solo

Postby james » Tue Apr 29, 2014 9:48 am

Yes, I think using an XLR to the left input will work.

We are planning an update that will allow input selection to be done.
User avatar
james
Site Admin
 
Posts: 1800
Joined: Fri Jun 06, 2008 8:12 pm

Re: Left input focursite itrack solo

Postby AC2N » Tue Apr 29, 2014 9:39 pm

ok, thank you for the quick reply, I find an adapter and I come here and tell how it works, apartment a few users of this card are in trouble.
I tried plug my stratt with a cable very fine (for hd camera) to the mic / headphone input. it does not work well below the A low, and after few minutes it bug totally full of notes which leave, even if the volume is muted. I guess interference?
long life for saunnus family
AC2N
 
Posts: 2
Joined: Tue Apr 29, 2014 8:26 am

Re: Left input focursite itrack solo

Postby james » Wed Apr 30, 2014 8:37 am

There is a problem when you use the mic input. Apple iOS devices have a high-pass filter that rolls off around 200Hz. This means low notes have their level reduced significantly which will cause problems with midi tracking. It's also the same if you try to use a tuner -- you can't accurately tune the lowest notes using the mic input! Higher notes are not a problem.

The only solution for these low notes is to use an input through the dock connector.

We will add something to let you select left/right input to solve this for the iTrack interfaces.
User avatar
james
Site Admin
 
Posts: 1800
Joined: Fri Jun 06, 2008 8:12 pm

Re: Left input focursite itrack solo

Postby jimmyjack » Fri Oct 24, 2014 8:22 am

james wrote:Yes, I think using an XLR to the left input will work.

We are planning an update that will allow input selection to be done.
jimmyjack
 
Posts: 2
Joined: Sun Dec 16, 2012 7:01 pm

Re: Left input focursite itrack solo

Postby kimmysawi » Fri Jul 06, 2018 9:58 am

AC2N wrote:Hello from France, sorry for the very bad English.
I bought B2M ipad and unfortunately I have the solo iTrack. see reviews of phenq here Its entrance is on the right (number 2). It does not work, I realized here.
I wonder if an XLR-jack adapter into the left would look better than the microphone input associated with headphones ?
An upcoming update will allow her to choose the input ?

Otherwise it is very promising, just playing acoustic in the ipad micro , thé résult is not bad .


Those low notes have there own level which can easily reduced and cause problem in tracking :(
kimmysawi
 
Posts: 1
Joined: Thu Jul 05, 2018 9:12 am


Return to B2M™ Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron