bleed over from my Wahoo

For the Wahoo™ Dual-Analogue, Digitally-Controlled Wah/Filter Pedal

bleed over from my Wahoo

Postby cleggfu » Fri Apr 26, 2019 3:44 pm

Bonjour. Right, ive got a guitar, going into the Wahoo then into a big muff then into a boss ns2 gate. I keep getting this weird half a second of signal after I have struck the notes. The video shows the problem with the gate on, and with it off. The main problem is sometimes it causes a really terrible bit of feed back instead of that weird noise. I shall now attempt to embed a video (hold the line caller).
That didn't work. Here is a link.
Posts: 2
Joined: Wed Jan 09, 2019 2:43 am

Re: bleed over from my Wahoo

Postby james » Mon Apr 29, 2019 6:43 pm

The sound is more obvious because of the high gain you have. The gate sound is normal. The Wahoo doesn't have a real gate, but closes the filter to reduce the noise. As the filter closes, you can hear the filter sweep from high to low. But I'm not sure why get this with the gate off too.

Which preset are you using? If it's not a factory preset, can you save the preset file using the desktop editor and post it here so I can try it here and see if I get the same thing?
User avatar
Site Admin
Posts: 1834
Joined: Fri Jun 06, 2008 8:12 pm

Return to Wahoo™ Support

Who is online

Users browsing this forum: No registered users and 1 guest