Opening the wahoo

For the Wahoo™ Dual-Analogue, Digitally-Controlled Wah/Filter Pedal

Opening the wahoo

Postby shott » Tue Sep 03, 2019 9:24 pm

So, after I bought my Wahoo I wrote you that the treadle is wobbling sideways. Back then I got this "pedal tension guide" pdf, but that just made me shake my head in disbelief. Well, I finally got around to try and fix it. Didn't even get past the first PCB before hitting a screw that didn't move a frikkin millimeter. Now its head is mush. Dafuq am I gonna do now?! And what hulk screwed those PCBs in?!
A photo of the disaster is up here:
Posts: 1
Joined: Tue Sep 03, 2019 9:12 pm

Re: Opening the wahoo

Postby james » Thu Nov 07, 2019 10:18 am

Appologies for the slow reply.

That is really annoying. These pedals were designed to be easy to repair! I've only seen this once before and the only way to remove it was to drill off the head of the screw. Then the board can lift out and the remaining part of the screw can be removed with pliars (or left in place -- there are a lot of screws to hold in the boards, and not all are required to hold the boards securely).

The screws should all be tightnened to a specified torque, I suspect this one wasn't.
User avatar
Site Admin
Posts: 1846
Joined: Fri Jun 06, 2008 8:12 pm

Re: Opening the wahoo

Postby shanorm » Wed Nov 27, 2019 8:19 am

It modified into quite useful data. I have become absolutely surfing through the net to your internet web page all people is inclined to get new records so see
Posts: 1
Joined: Sat Nov 23, 2019 8:22 am

Return to Wahoo™ Support

Who is online

Users browsing this forum: No registered users and 1 guest