Wahoo switch broken
Wahoo switch broken
Hi, I tried messaging James but had no response as yet - my Wahoo footawtich had given up the ghost. How do I get a replacement? Is resoldering a replacement in a hard piece of soldering?
Re: Wahoo switch broken
Sorry, I was on holiday and couldn't access the forum. I think you contacted us by email and you got a reply - is everything taken care of now?
Soldering in a new footswitch is very easy. Open the bottom of the Wahoo to remove the metal plate. The switch is mounted to the case: just undo the nut on the outside and the switch will fall inside the case. 2 Wires on the switch, just desolder these from the old switch and resolder to the new switch (doesn't mattery which way round). Then reassemble everything again.
Soldering in a new footswitch is very easy. Open the bottom of the Wahoo to remove the metal plate. The switch is mounted to the case: just undo the nut on the outside and the switch will fall inside the case. 2 Wires on the switch, just desolder these from the old switch and resolder to the new switch (doesn't mattery which way round). Then reassemble everything again.