Software improvement suggestions

For the Wahoo™ Dual-Analogue, Digitally-Controlled Wah/Filter Pedal

Moderators: johnmc, james

Re: Software improvement suggestions

Postby Flop54 » Mon Nov 11, 2013 10:16 am

Ok i understand!
Now I will annoy you in the volume section because I wait impatiently voluum!
Flop54
 
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Postby Flop54 » Fri Dec 27, 2013 7:54 pm

Hello would you have some times to think about my idea? Because if this Idea will become reality I will buy the voluum quickly!
Flop54
 
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Postby james » Fri Dec 27, 2013 8:26 pm

We've been too busy with the Voluum to do much on the Wahoo. A new firmware (beta) for the Wahoo was released recently with various additions, but many of these were older suggestions. viewtopic.php?f=29&t=1152

On the Voluum, we have added two LFOs as you suggested, and we are very happy with the results.

Have you seen the new video of the Voluum? http://youtu.be/1zoS0wmwqu8
User avatar
james
Site Admin
 
Posts: 1861
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Postby Flop54 » Sat Dec 28, 2013 12:17 pm

I saw the video and the update. I find the both really exiting.. How work The two LFO on the voluum?
Sorry for my impatience but I would buy the voluum if the wahoo can make approximately the same sound than the subdecay prometheus..
I really love your product and I want use the wahoo more..

Thank you
Flop54
 
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Postby james » Sat Dec 28, 2013 12:24 pm

In the Voluum, usually there is one LFO. You can turn on "duo" mode to get two LFOs. When this is done, the second LFO has its tempo locked to the first LFO (they use the same bpm, or MIDI sync clock), but you can set different waveforms, depth, tempo divisions, phase (between LFO1 and LFO2). Because these parameters can be modulated, you can do things like fade from one LFO to another by modulating the depth of both LFOs; or make the sound more simple or more complex as you fade one of the LFOs and keep the other constant -- lots of possibilities.

You can get the Voluum user manual from here: http://www.sonuus.com/products_voluum_docs.html
User avatar
james
Site Admin
 
Posts: 1861
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Postby Flop54 » Sat Dec 28, 2013 3:58 pm

Ok thank you very much. If I understand the two LFO are in parallels.. I hope you will do something like I ask you because I think it can sound really really good!
Thank you for your quickly respond!!!!
Flop54
 
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Postby james » Sat Dec 28, 2013 4:04 pm

The LFOs are essentially in series, not parallel.
User avatar
james
Site Admin
 
Posts: 1861
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Postby Flop54 » Sat Dec 28, 2013 4:15 pm

I have a little hard to understand but I can not wait to listen and see examples ...
Flop54
 
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Postby mjkl » Wed Jan 01, 2014 9:16 pm

Hi,

Would it be possible to set the LFO in hertz rather than bpm? Also, to expand the upper range of possible tempo?

All the best,
Mark
mjkl
 
Posts: 2
Joined: Wed Jan 01, 2014 8:15 pm
Location: Bristol, UK

Re: Software improvement suggestions

Postby james » Thu Jan 02, 2014 9:42 am

Setting in Hz would be possible. We didn't do this initially to keep it simple. You are the first person to ask about this! I will add it to the list of requested changes.

BPM speed is limited by hardware, so above a certain speed the hardware won't be able to keep up.
User avatar
james
Site Admin
 
Posts: 1861
Joined: Fri Jun 06, 2008 8:12 pm

PreviousNext

Return to Wahoo™ Support

Who is online

Users browsing this forum: No registered users and 2 guests

cron