Software improvement suggestions

[Flop54]

Hello,
So I confirmed. Sorry bugging with that but I record a bass line and suddenly I could change the parameters in real time. the possibilities are huge .. so I think this idea of combining filters will become a big quality of wahoo

.we have already asked you but I think it is unfortunate that we have not led flashing to prevent the LFO is running and what tempo. tbut as the LFO is reset to zero when you turn on the effect on, like i ask you, it would not be possible.

[Flop54]

Hello,
Thank you for voluum it really is a great pedal. Is it possible to add to the voluum and the wahoo a general parameter. It would be a "preset scroll". If one uses for example after 15 sounds 15 would fall on the first down instead of 15?

thank you very much

[james]

If I understand you correctly, we are planning this for both Wahoo and Voluum. It will be a set-list feature.

You will be able to select the presets you want, and the order you want them. When this is enabled you will then only be able to select those presets in your set list, regardless of the order. So you could go F01, P22, F10, P37, P21, back to F01...

Pleased to hear you like your Voluum

[Flop54]

Ooookkkk cool!!!! You're the best!!

[james]

Indeed, this wasn't implemented in the Voluum. I have it working, but there is a small issue: normally the LFO runs continuously so the LED meter updates to show what is happening. The idea is that you know where it's going to be when you enable the effect. Obviously, when resetting is enabled, the meter jumps to show the new position -- it looks a it odd.

What are your thoughts on this?

We could add an option to allow "reset LFO on effect enable" but I wonder if there's a better way to do this. Maybe the LFO should stop and not update the LED meters when the effect is inactive (unless sync'd to MIDI clock)? Happy to discuss some ideas.

[Flop54]

Yes I agree: the LFO shoulds stop and not update the LED meters

I think the way to be able to manage the voluum with a pedal is excellent, each parameter may be differently settle for low and high position ... This is not applicable to the Wahoo? Same question for the lfo duo that is exactly what is missing is the wahoo too.
What do you think of that?

And finally that same question to the volum can we change the phase when tempo sync is used midi?

thank you

[p8guitar]

Maybe it is possible to assign the footpedal with a parameter,"dry/wet" would be great.
Is it possible?

Christian

+1, I'd like that, too.
Especially when the pedal is in envelope mode, it would be nice to be able to use it for controlling other parameters like dry/wet mix.
Peter

[james]

See this beta version: viewtopic.php?f=29&t=1152

You can now control envelope parameters using the pedal by setting hi/lo values for these.

[Flop54]

See this beta version: viewtopic.php?f=29&t=1152

You can now control envelope parameters using the pedal by setting hi/lo values for these.

Yes it is really cool!! Can you apply this to the LFO parameter?

[james]

Some LFO parameters can already be pedal-controlled. Obviously the tempo can be set, but also now the LFO division can be set by the pedal too.