flame app iOS free Not Responding

General discussion on tuning musical instruments.

Moderators: johnmc, james

Post Reply
captken
Posts: 3
Joined: Wed Oct 05, 2016 8:30 pm

flame app iOS free Not Responding

Post by captken »

Using an iPad mini 2 Retina and iOS vers 10 with an IRIG PRO duo and your gm2 ver3.
The above configuration works fine with SampleTank and Garageband. When I tried to use the Flame app tuner there is no response after plugging into the iPad. Since there are not any preferences to set before hand, what am I doing wrong?
Thank you for your attention.
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: flame app iOS free Not Responding

Post by james »

Which input are you using on the iRig pro? Does it work if you use the other one?

Does FLAME work ok if you use the built-in mic on the iPad (i.e., remove the iRig pro)?
captken
Posts: 3
Joined: Wed Oct 05, 2016 8:30 pm

Re: flame app iOS free Not Responding

Post by captken »

1. Using the #2 input on the iRig Duo.
2. YES, Flame works with the built-in mic on the iPad.

Thanks.
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: flame app iOS free Not Responding

Post by james »

Try input #1 on the iRig Duo.

I'm not sure, but FLAME may only respond to the left channel if there is a stereo input.
captken
Posts: 3
Joined: Wed Oct 05, 2016 8:30 pm

Re: flame app iOS free Not Responding

Post by captken »

Thank you, James:

Input #1 works!
hiretablets
Posts: 1
Joined: Thu Jan 03, 2019 9:41 am
Location: USA
Contact:

Re: flame app iOS free Not Responding

Post by hiretablets »

have to asked the same question as well.. it is working on IOS
pamnhg2345
Posts: 1
Joined: Wed Mar 06, 2019 11:59 am
Contact:

Re: flame app iOS free Not Responding

Post by pamnhg2345 »

Great Information
Post Reply