no midi from i2m in Cubase
no midi from i2m in Cubase
I need help with routing the i2m musicport into Cubase.
Attaching screen shots / pics with i2m version and examples of the problem
Please let me know if more info is needed
I tried all the combonations of settings in i2m musicport and cubase, but was unable to see midi acivity in Cubase or other software. I have also updated firmware.
- Attachments
-
- demonstration of active i2musicport, no midi activity in Cubase
- smiggles-Forum-tech-supportSonuus-Cubase-noMIDI-needMidiFix-2017-image7.JPG (189.97 KiB) Viewed 5930 times
-
- midi cubase settings 1
- smiggles-Forum-tech-supportSonuus-Cubase-noMIDI-needMidiFix-2017-image6.JPG (210.08 KiB) Viewed 5930 times
-
- i2m firmware version
- smiggles-Forum-tech-supportSonuus-Cubase9-noMIDI-needMidiFix-2017-image5.JPG (56.19 KiB) Viewed 5931 times
Re: no midi from i2m in Cubase
What other software have you tried? Have you tried Midi-Ox? (http://www.midiox.com/moxdown.htm) I find this the most useful tool to debug MIDI problems.
You can use the i2M's "latency test mode", accessed from the setup page. In this mode, the i2M will send a MIDI note and flash it's LED at the same time. This avoids any issues with MIDI conversion, or MIDI setup, so know the i2M is actually sending MIDI. If this works, the problem could be the setup of the MIDI output in the i2M.
I would first try to use MIDI-Ox and latency test mode just to verify you are getting MIDI. If this works, try to do the same in Cubase.
You can use the i2M's "latency test mode", accessed from the setup page. In this mode, the i2M will send a MIDI note and flash it's LED at the same time. This avoids any issues with MIDI conversion, or MIDI setup, so know the i2M is actually sending MIDI. If this works, the problem could be the setup of the MIDI output in the i2M.
I would first try to use MIDI-Ox and latency test mode just to verify you are getting MIDI. If this works, try to do the same in Cubase.
Re: no midi from i2m in Cubase
thanks for your respone, could you give some specific steps in MIDI0x to use test rhe midi routing, I haven't used that softwre in at least 10 years
thanks and happy new year
thanks and happy new year
Re: no midi from i2m in Cubase
In MIDI-Ox, just check that you can view the MIDI messages being sent by the i2M.
Connect the i2M before you start Midi-Ox.
Menu: Options | MIDI Devices, make sure the i2M is selected as a MIDI input.
Make sure you can see the input monitor: Menu: View | Input Monitor
Happy New Year too!
Connect the i2M before you start Midi-Ox.
Menu: Options | MIDI Devices, make sure the i2M is selected as a MIDI input.
Make sure you can see the input monitor: Menu: View | Input Monitor
Happy New Year too!