Software improvement suggestion

For the Voluum™ Digitally-Controlled Analogue Volume Effects Pedal

Moderators: johnmc, james

Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestion

Post by Flop54 »

Thank you.

This is my preset http://bass-evolution.com/fx/Lost.voluum. It play no sound/sound/no sound/sound and i want to invert it like sound/no sound/sound/no sound.
i have to upload the file on my website because the forum said to me "The extension voluum is not allowed." i don't understand.
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestion

Post by james »

Thanks for hosting your file. I've enabled the .voluum extension on the forum now.

I can reproduce your problem, and we're currently investigating this.
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestion

Post by james »

Please try the attached firmware, version 1.1.01. We found a problem in the LFO phase calculation. Your preset should now work correctly: setting the phase to 32 makes it go sound/no-sound/sound, and phase of 0 gives no-sound/sound/no-sound.
Attachments
Voluum_1_0101.sfu
Voluum firmware (1.1.01) -- bug fix test version.
(88.05 KiB) Downloaded 2859 times
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestion

Post by Flop54 »

Ok i have updating my voluum today and I will test it tomorrow. But it seem to be ok. What about the phase higher than 32?
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestion

Post by james »

Phase higher than 32 should work ok. All phases should work as expected: at values other than 0 or 32 the start part (either on or off) won't be exactly half of the waveform, it's size will depend on the phase.

However, currently I think it only works if div = 1. Looking at correcting this so it works for all divs.
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestion

Post by james »

Here is another updated firmware that fixes the LFO retrigger phase not working correctly with div values other than 1.
Attachments
Voluum_1_0101a.sfu
Voluum firmware version 1.1.01(a) to fix LFO retrigger phase when div is not 1.
(88.05 KiB) Downloaded 2855 times
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestion

Post by Flop54 »

I will test your update tomorrow. Thank you very much!
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestion

Post by Flop54 »

It seems to work but I wan to test again with a midi sync..

Anyway I noticed a difference between the wahoo editor's and the voluum editor's.
When I change a parameter in the wahoo I can switch the effect on to hear the change with out save it.
I believe that it dosen't work with the voluum. Is it possible?
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestion

Post by james »

MIDI Sync -- please do this. I've not had time to verify everything is ok with midi sync, so do let me know if you find any problems.

You have found a bug in the Voluum. It should let you do this. I think it is a bug introduced by "preset bypass" mode... I will check it for you.
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestion

Post by Flop54 »

Yes!

How do I find bug to win a b2m ?? :)
Post Reply