Thank you.
This is my preset http://bass-evolution.com/fx/Lost.voluum. It play no sound/sound/no sound/sound and i want to invert it like sound/no sound/sound/no sound.
i have to upload the file on my website because the forum said to me "The extension voluum is not allowed." i don't understand.
Software improvement suggestion
Re: Software improvement suggestion
Thanks for hosting your file. I've enabled the .voluum extension on the forum now.
I can reproduce your problem, and we're currently investigating this.
I can reproduce your problem, and we're currently investigating this.
Re: Software improvement suggestion
Please try the attached firmware, version 1.1.01. We found a problem in the LFO phase calculation. Your preset should now work correctly: setting the phase to 32 makes it go sound/no-sound/sound, and phase of 0 gives no-sound/sound/no-sound.
- Attachments
-
- Voluum_1_0101.sfu
- Voluum firmware (1.1.01) -- bug fix test version.
- (88.05 KiB) Downloaded 2922 times
Re: Software improvement suggestion
Ok i have updating my voluum today and I will test it tomorrow. But it seem to be ok. What about the phase higher than 32?
Re: Software improvement suggestion
Phase higher than 32 should work ok. All phases should work as expected: at values other than 0 or 32 the start part (either on or off) won't be exactly half of the waveform, it's size will depend on the phase.
However, currently I think it only works if div = 1. Looking at correcting this so it works for all divs.
However, currently I think it only works if div = 1. Looking at correcting this so it works for all divs.
Re: Software improvement suggestion
Here is another updated firmware that fixes the LFO retrigger phase not working correctly with div values other than 1.
- Attachments
-
- Voluum_1_0101a.sfu
- Voluum firmware version 1.1.01(a) to fix LFO retrigger phase when div is not 1.
- (88.05 KiB) Downloaded 2918 times
Re: Software improvement suggestion
I will test your update tomorrow. Thank you very much!
Re: Software improvement suggestion
It seems to work but I wan to test again with a midi sync..
Anyway I noticed a difference between the wahoo editor's and the voluum editor's.
When I change a parameter in the wahoo I can switch the effect on to hear the change with out save it.
I believe that it dosen't work with the voluum. Is it possible?
Anyway I noticed a difference between the wahoo editor's and the voluum editor's.
When I change a parameter in the wahoo I can switch the effect on to hear the change with out save it.
I believe that it dosen't work with the voluum. Is it possible?
Re: Software improvement suggestion
MIDI Sync -- please do this. I've not had time to verify everything is ok with midi sync, so do let me know if you find any problems.
You have found a bug in the Voluum. It should let you do this. I think it is a bug introduced by "preset bypass" mode... I will check it for you.
You have found a bug in the Voluum. It should let you do this. I think it is a bug introduced by "preset bypass" mode... I will check it for you.
Re: Software improvement suggestion
Yes!
How do I find bug to win a b2m ??
How do I find bug to win a b2m ??