problem with heel-down position
Posted: Sun Feb 18, 2018 6:17 am
Hello,
My Wahoo seems to have some trouble with heel-down position. Even though I set the pedal to the heel-down position, my Wahoo seems to recognize that the pedal is still halfway. I found this problem while I was doing these things:
1. connecting Wahoo to Desktop Editor
Desktop Editor showed that Wahoo is not in 100% heel-down position though the pedal is completely in heel-down position physically.
2. monitoring MIDI CC value
The value of CC#11 was changed only from 22 to 127; I think this should show 0 to 127 if everything is OK.
I found this topic and tried the calibration mode, too.
viewtopic.php?f=22&t=1126
The calibration mode showed 330-493 whereas it is mentioned in the topic that this should be approximately from 280 to 490.
The firmware is up-to-date. (1.5.00)
Do you guys have any idea to fix this problem? Is there any setting I have missed?
My Wahoo seems to have some trouble with heel-down position. Even though I set the pedal to the heel-down position, my Wahoo seems to recognize that the pedal is still halfway. I found this problem while I was doing these things:
1. connecting Wahoo to Desktop Editor
Desktop Editor showed that Wahoo is not in 100% heel-down position though the pedal is completely in heel-down position physically.
2. monitoring MIDI CC value
The value of CC#11 was changed only from 22 to 127; I think this should show 0 to 127 if everything is OK.
I found this topic and tried the calibration mode, too.
viewtopic.php?f=22&t=1126
The calibration mode showed 330-493 whereas it is mentioned in the topic that this should be approximately from 280 to 490.
The firmware is up-to-date. (1.5.00)
Do you guys have any idea to fix this problem? Is there any setting I have missed?