Any way to get custom curve for volume control?

For the Voluum™ Digitally-Controlled Analogue Volume Effects Pedal

Moderators: johnmc, james

Post Reply
banjohood
Posts: 2
Joined: Thu Jan 16, 2020 3:07 pm

Any way to get custom curve for volume control?

Post by banjohood »

I just bought the Voluum. I love everything about it except the curves on the volume control. I find it suffers from the same problem (for me) as most volume pedals: the range of usable volume is too small. I've tried every curve setting, and in every one the vast majority of volume change occurs in about 25% range of the pedal's motion. That makes it hard to tweak exactly the right volume level for a live mix (I do this with a looper). It also makes the LEDs mostly unhelpful because once you get to the lowest usable volume, all but one of the volume LEDs are on. I can get close to a usable range I want if I set the Lo to -15 and Hi to 0, but then I can't get to silent with the pedal heel-down.
Any ideas on how to work around this?
banjohood
Posts: 2
Joined: Thu Jan 16, 2020 3:07 pm

Re: Any way to get custom curve for volume control?

Post by banjohood »

OK, I figured it out! Just had to re-calibrate the pedal because the heel-down wasn't going down to 0, so the heel-down off feature didn't work.
Post Reply