Software improvement suggestions

For the Wahoo™ Dual-Analogue, Digitally-Controlled Wah/Filter Pedal

Moderators: johnmc, james

Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Post by Flop54 »

Thank you!
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Post by Flop54 »

You can look with this preset because i think it is not regular? Anyway it work very good!

Thank you
Attachments
grand pimp sin.wahoo
(468 Bytes) Downloaded 955 times
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Post by james »

Yes, this is normal. If you change the waveform from sine to triangle the steps will be evenly spaced in time.
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Post by Flop54 »

You mean that with sine it work?
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Post by james »

I mean with sine the steps are not even, but with triangle wave instead the steps are even. This is normal.

The reason is because of how the steps are quantised. Sine is not linear, so the steps are not linear in time. Triangle is linear, so the steps are also linear.
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Post by Flop54 »

Ok thank you I will look at this as soon as possible!

Another question when the wahoo is plugging to a computer to edit it. I can use the USB to use the midi sync with the same computer?
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Post by james »

Yes, you can use the editor at the same time as using USB-MIDI from the same computer.
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Post by Flop54 »

Ok what is the proceed to do the midi sync via USB because in my software I don't find the wahoo on the midi output?
User avatar
james
Site Admin
Posts: 1866
Joined: Fri Jun 06, 2008 8:12 pm

Re: Software improvement suggestions

Post by james »

The Wahoo should appear as a USB MIDI device in your software. What software are you using?

Also, often software needs to be restarted when any USB device is connected. So make sure the Wahoo is connected via USB then run your software.

Midi-ox is a useful program for testing MIDI devices. You can use this to send MIDI clock to the Wahoo for testing. http://www.midiox.com/
Flop54
Posts: 122
Joined: Sat Apr 13, 2013 2:57 pm

Re: Software improvement suggestions

Post by Flop54 »

I use midi clock and protools.. But when I plug the wahoo, the editor work but windows said that it is a new material... Windows want a driver. Is it normal. I'll try your software thank you!
Post Reply