Treadle calibration and not engaging

For the Wahoo™ Dual-Analogue, Digitally-Controlled Wah/Filter Pedal

Moderators: johnmc, james

Post Reply
Jmac
Posts: 2
Joined: Wed Dec 25, 2019 6:08 am

Treadle calibration and not engaging

Post by Jmac »

Hi, I have a problem with my wahoo. As stated above, I have had trouble engaging the effect. Neither the bypass switch not the pedal engage the pedal
Also I tried to calibrate the pedal and it was showing 938 at the heel and 928 at the toe position. I tried it in a free power point on its own power supply and it still had this problem. I'm not sure what to do.
Jmac
Posts: 2
Joined: Wed Dec 25, 2019 6:08 am

Re: Treadle calibration and not engaging

Post by Jmac »

I've checked the pedal again and I've sorted out the problem with engaging but when trying the pedal again, it doesn't make a difference in the value at all. When trying to calibrate the pedal, it only shows a value of 941 in all positions. If I could get my advice on fixing this that would be appreciated.
Prajaktaa
Posts: 1
Joined: Tue Jan 21, 2020 11:41 am
Location: Pune
Contact:

Re: Treadle calibration and not engaging

Post by Prajaktaa »

Hi!
I am facing same problem. please any suggestion?
krakatoad
Posts: 2
Joined: Sun Mar 15, 2020 8:36 pm

Re: Treadle calibration and not engaging

Post by krakatoad »

I am also having the same problem. Is anyone answering posts on this forum anymore?
Shrushti6636
Posts: 0
Joined: Sat Jul 11, 2020 6:19 am
Contact:

Re: Treadle calibration and not engaging

Post by Shrushti6636 »

Thank you for your help. I'm looking for something like that
Post Reply