hi,
here is my setup:
bass guitar - B2M - Alesis Nanobass Midi module - Markbass powered Amp.
I would like to know how can I bypass my original Bass sound from the Bass Guitar to the Amp when I don't want the sound from the Midi Module.
thanks for help.
B2M bypass
Re: B2M bypass
The B2M has a THRU connection, so you can connect that to your amp so you can have MIDI and the amp at the same time.
If you want to switch between the MIDI and the amp sounds, you need to use an A/B switch box. There are lots of these available... this is one I just found that's not expensive:
http://www.musiciansfriend.com/amplifie ... footswitch
If you want to switch between the MIDI and the amp sounds, you need to use an A/B switch box. There are lots of these available... this is one I just found that's not expensive:
http://www.musiciansfriend.com/amplifie ... footswitch
-
- Posts: 5
- Joined: Thu May 09, 2013 2:53 pm
Re: B2M bypass
can you show me where the switch should be in my connection?
Bass - B2M - Alesis Nanobass - Powered Amp
Bass - B2M - Alesis Nanobass - Powered Amp
Re: B2M bypass
Try something like this:
Bass -> B2M
B2M (MIDI out)-> Alesis Nanobass -> A/B Switch (A connection)
B2M (THRU)-> A/B Switch (B connection)
A/B Switch ("Y" connection which is always connected) -> Powered Amp
So, when you switch the A/B connection, it's switching the input of the amp between the direct bass signal coming through the B2M and the synth bass signal from the Nanobass.
Bass -> B2M
B2M (MIDI out)-> Alesis Nanobass -> A/B Switch (A connection)
B2M (THRU)-> A/B Switch (B connection)
A/B Switch ("Y" connection which is always connected) -> Powered Amp
So, when you switch the A/B connection, it's switching the input of the amp between the direct bass signal coming through the B2M and the synth bass signal from the Nanobass.
-
- Posts: 5
- Joined: Thu May 09, 2013 2:53 pm
Re: B2M bypass
thank you so much. That is what I am thinking of.
-
- Posts: 5
- Joined: Thu May 09, 2013 2:53 pm
Re: B2M bypass
why I have to unplug the bass cable from the B2M and replug in order to activate the B2M after 30 mins of idle?
Re: B2M bypass
This is a feature to prolong battery life if you leave it accidentally connected. If there is a signal present (so it generates MIDI notes) it won't turn off.
-
- Posts: 5
- Joined: Thu May 09, 2013 2:53 pm
Re: B2M bypass
it would be nice if the B2M can activate when I start playing the bass event after long idle
Re: B2M bypass
can you show me where the switch should be in my connection? check weight watchers points calculator here!