Using an iPad mini 2 Retina and iOS vers 10 with an IRIG PRO duo and your gm2 ver3.
The above configuration works fine with SampleTank and Garageband. When I tried to use the Flame app tuner there is no response after plugging into the iPad. Since there are not any preferences to set before hand, what am I doing wrong?
Thank you for your attention.
flame app iOS free Not Responding
Re: flame app iOS free Not Responding
Which input are you using on the iRig pro? Does it work if you use the other one?
Does FLAME work ok if you use the built-in mic on the iPad (i.e., remove the iRig pro)?
Does FLAME work ok if you use the built-in mic on the iPad (i.e., remove the iRig pro)?
Re: flame app iOS free Not Responding
1. Using the #2 input on the iRig Duo.
2. YES, Flame works with the built-in mic on the iPad.
Thanks.
2. YES, Flame works with the built-in mic on the iPad.
Thanks.
Re: flame app iOS free Not Responding
Try input #1 on the iRig Duo.
I'm not sure, but FLAME may only respond to the left channel if there is a stereo input.
I'm not sure, but FLAME may only respond to the left channel if there is a stereo input.
Re: flame app iOS free Not Responding
Thank you, James:
Input #1 works!
Input #1 works!
-
- Posts: 1
- Joined: Thu Jan 03, 2019 9:41 am
- Location: USA
- Contact:
Re: flame app iOS free Not Responding
have to asked the same question as well.. it is working on IOS
-
- Posts: 1
- Joined: Wed Mar 06, 2019 11:59 am
- Contact:
Re: flame app iOS free Not Responding
Great Information